- “Lead Innovation through Values of Customer”
We try to take one step ahead for a better future by a corporate
affiliated research institute which is a R&D center.
Framework of K-PACK R&D Center
Main equipment introduction
Residual solvent measuring instrument (GC)
| Usage | Gravure ink remaining inside the packaging and Adhesive residue (chemical) and weight measurement. [ Domestic standard: toluene 2 mg/㎡ / total residual solvent 6 mg/㎡ or less] |
|---|---|
| Measuring range | 12 VIAL / Range Infinity |
| Precision |
Oxygen Permeability (OTR)
| Usage | The oxygen permeability tester is a device that measures the oxygen permeation of films, sheets and packaging materials. |
|---|---|
| Measuring range | 0.05 ~ 5,000 ㎠ / (㎡-d) |
| Precision | 0.001 ㎠ / (㎡-d) |
Low temperature incubator
| Usage | It is a device that cultivates microorganisms at low temperatures to determine. Whether micro-organisms grow in the manufacturing film or in circulating air in the field. |
|---|---|
| Measuring range | 0~65℃ |
| Precision | ± 1℃ |
FT-IR
| Usage | It is a Fourier transform infrared spectrophotometer that identifies materials (material, hardness, etc.) and analyzes pollutants through the infrared spectrum. |
|---|---|
| Measuring range | 7800~350 cm -1 / 12500~240 cm -1 |
| Precision | 0.25,0.5, 1,2, 4, 8, 16 cm-1(middle/IR) / 2,4,8,16 cm-1(Near IR) |
Moisture Permeability (WVTR)
| Usage | Moisture permeability tester is a device that measures water permeation of films, sheets and food packaging. |
|---|---|
| Measuring range | 0.01 ~ 10,000 g/㎡·24h |
| Precision | 0.01 g/㎡·24h |
Clean Bench
| Usage | This is a sterile workbench that prepares basic samples in a sterile environment for microbial culture preparation. |
|---|---|
| Measuring range | 100 Grade@≥0.5㎛ |
| Precision |
Haze meater
| Usage | It is a device that measures the haze (cloudiness) and transmittance of transparent and translucent materials such as plastics and films. |
|---|---|
| Measuring range | 16.5mm/ 21mm / 400~700nm |
| Precision | ± 0.01 |
Coefficient of Friction Meter(COF)
| Usage | It is a device suitable for the slip property evaluation of film, paper, sheet, etc. Also, it measures static friction coefficient and motion friction coefficient at the same time. |
|---|---|
| Measuring range | 0~ 99.9℃ (based on the contact surface of the specimen) / 100mm (displacement) |
| Precision | 0.5% FS |
Universal material testing machine
| Usage | It is a device that measures physical properties of samples such as plastics and sheets through various material tests (tension, compression, etc.). |
|---|---|
| Measuring range | 0.01 to 2032 mm/min (Speed Range) |
| Precision | 0.01% |
Thermal gradient tester
| Usage | It is a device that can seal films and sheets in various ways by controlling temperature, setting pressure, and sealing time. |
|---|---|
| Measuring range | 0~300℃ / 0.1~99.9sec / 10mm |
| Precision | ±0.2℃ |
Microtome
| Usage | This is a device that checks the material structure by cutting a specimen of a single layer of films and sheets according to a set value. |
|---|---|
| Measuring range | 0~20mm |
| Precision | ±1mm |
Autoclave
| Usage | It is a device that performs a sterilization test through steam → immersion → spray by setting the temperature, pressure and time for samples such as retort pouch and sterilization film. |
|---|---|
| Measuring range | 0~3.5Bar / 0~250℃ |
| Precision |
